The No-Nonsense Rundown of Sex Dolls- What Nobody Tells You

[FrankJScott]

CLICK FOR THE BEST SEX DOLL FEET GUIDE HERE

Standing Feet Or Non-Standing Feet? The Differences Explained
Nobody gives standing feet a thought until the day they need them, and that's when the massive difference becomes apparent. On the spec sheet it looks small, yet it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Knowing the difference before you order is among the simplest ways to dodge an irritating purchase.
 
Attempting to Stand Her Will Damage the Feet
The basic difference is simple. With standing feet, metal bolts are embedded in the soles, letting the doll stand upright without support. Damage to the feet is the result of attempting to stand a doll with non-standing feet, which don't have these bolts and so only permit sitting or lying down. The bolts are the key, and everything else follows from whether they're present or not.
 
What Non-Standing Feet Can't Do
It's standing feet that photography and display can't do without. Unaided standing means full-length poses without visible supports, and display in a corner, a doorway, or anywhere else that needs her to be upright. Poses and settings in a wide range become possible, which non-standing feet rule out, and most photographers specify standing feet when ordering for exactly that reason.
 
Metal Bolts Keep Water Out of the Feet
In the shower, too, standing feet are necessary. If you want to shower with your doll, she needs to be able to stand, because lying her down in a shower is both impractical and dangerous. Her stability in a wet environment is down to the standing feet, and the metal bolts keep the feet from absorbing water the way non-standing feet would. Because water absorption in non-standing feet can lead to rust and eventual structural failure, this is a genuine safety consideration.
 
Essentially Unfixable Once It Starts
Worth expanding is the shower use point, as it's the source of a lot of damaged dolls. Foam or filler material sits inside the ankle of non-standing feet, and it absorbs water when it gets wet. Weeks or months pass before the rust the water causes in the metal skeleton inside the leg becomes evident, and it's essentially unfixable once it starts. No matter how diligent you are, a doll with non-standing feet should never be in the shower; water finds its way in anyway of precautions.
 
Space-Efficient Storage
Some setups make standing feet easier to store as well. A hanging hook or a storage case isn't needed for a doll with standing feet, who can be stored upright in a corner, a wardrobe, or a storage cabinet. Without room for a hanging setup, this is a space-efficient option, and for anyone who wants to display the doll rather than keep her hidden it's a good one. With the standing feet, the doll can be stored clearly and accessibly, which some customers prefer.
 
Weight and Price Trade-Offs
The price you pay for standing feet is that they're a little more costly and a little heavier. Few percent higher is the usual price versus a doll with non-standing feet, with the metal bolts adding a small amount of weight and the manufacturing process being more involved. The additional cost is usually worth it and the difference is small, but an extremely tight budget makes it worth knowing about.
 
Not a Reason to Avoid Standing Feet
Bare feet can make the bolts noticeable, which is the other drawback. On a doll with high-heeled shoes or open-toed footwear, the bolts might be noticeable in photos, which some purchasers find distracting. Cover the feet with closed shoes or select footwear that conceals the bolts and this minor aesthetic issue is solved, so it's not a reason to stay away from standing feet entirely.
 
Putting the Savings Elsewhere
If you only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are fine, and cheaper and lighter too. A doll that lives mainly in a bed or on a sofa gets by perfectly well on non-standing feet, with the savings available for upgrades like articulated hands or a better wig. Nothing wrong with this choice for buyers who know what they want; it's completely valid.
 
Maximum Softness
There's a minor softness and flexibility to non-standing feet that some buyers find more comfortable to touch. You won't usually choose on this alone, as it's a subtle difference, but it's worth knowing about if you're specifically looking for maximum softness. A hard core inside isn't what you feel in the feet on non-standing dolls; they feel more like the rest of the doll.
 
Foam in the Ankle Can't Take the Weight
The sizable risk with non-standing feet is that buyers forget what kind of feet they have and try to stand the doll anyway. The foam inside the ankle can't support the doll's weight. It tears or collapses, and that's genuine damage from a usual mistake. The feet have been permanently damaged, so the doll can no longer stand even if you attempt to support her. Non-standing feet should be remembered as non-standing, and their limits shouldn't be tested.
 
If You Might Want Them Later
And what about retrofitting standing feet to a doll that doesn't have them? The answer, in short, is no, not readily. Cutting into the feet and installing new hardware is what adding the bolts subsequently requires, which is pricey and frequently doesn't work as well as the original; the bolts are embedded in the soles during manufacturing. If you might want standing feet later, and you're considering a doll without them, purchasing a doll with standing feet in the first place beats trying to add them later.
 
Selecting Between Standing and Non-Standing Feet
Purchasers choosing between standing and non-standing feet can follow some uncomplicated useful advice. You need standing feet if you plan to photograph the doll, display her standing, or use her in the shower. When you only want to use her in bed or on a sofa, and display doesn't matter to you, non-standing feet are perfectly adequate. When in doubt, standing feet win, since they leave every choice open and cost only a little more.
 
Lying Down Storage Needs More Space
There's a gender consideration as well that's worth mentioning. Because male dolls are heavier and more difficult to store in any other way, they ordinarily get more from standing feet than female dolls do. A 45kg male doll that can't stand is a doll that has to be stored lying down, which puts pressure on the body and needs more space. Male dolls can store upright with standing feet, which is a genuine upside for customers who don't have a lot of room.
 
Evident Hardness at the Bottom
There's a final note to make on the aesthetic difference between standing and non-standing feet. When the doll is barefoot, the small hardness at the bottom of standing feet, caused by the bolts, can be visible. Particularly on dolls with delicate features, some customers find the marginally industrial look of the hard soles less aesthetically pleasing. The softer and more natural look of non-standing feet is what some purchasers prefer. This trade-off only matters when you're photographing the doll barefoot, so factor it into your decision if barefoot photos are a priority.
 
Bolt Care for Standing Feet
It's worth considering the maintenance angle as well. Keep an eye on the bolts in standing feet, since a loose bolt can damage the foot or the ankle while a bolt that falls out completely can make the doll collapse. If the bolts feel loose when you gently twist them to check, which you should do every few months, tighten them with the appropriate tool. With no hardware to come loose, non-standing feet avoid this issue and are marginally lower-maintenance in the long run.
 
Stability Depends on the Surface
The bolts have an effect, too, on how the doll stands on distinct surfaces. The bolts grip well on carpet, so the doll is steady. Slipping bolts on hard flooring, especially if the floor is silky, can mean the doll needs extra support to stay upright. A small mat or a grippy pad under the feet will avoid sliding on a hard surface, so consider one. It only concerns standing feet: non-standing feet don't have the issue because the doll isn't standing in the first place, but displaying one on a hard floor makes it worth knowing about.
 
More Natural-Looking Without the Bolts
Last of all, and often overlooked, is how standing feet impact the doll's overall proportions. A small amount of length is added to the foot by the bolts, which can somewhat change the way the doll looks in barefoot photos. It's a subtle effect that's generally invisible in shoes, yet worth knowing about for barefoot photography when you care about precise proportions. This effect isn't present in non-standing feet, as they don't have the bolts, so the feet are somewhat shorter and more natural-looking.
 
Final Verdict on Feet
Bottom line: for most buyers standing feet are worth the additional cost, opening up posing, display, storage and shower choices that non-standing feet don't. The only purchasers who should skip them are those who are certain the doll will only be used in bed and won't be displayed or photographed standing. The better choice for everyone else is standing feet, one of the simplest upgrades to justify. More info at this rosslink. Also check out image source for more.

CHECK OUT THE BEST SEX DOLL GUIDE ONLINE