Foto-Michael support

Understanding Standing Feet Vs Non-Standing Feet On A Sex Doll
Standing feet are the sort of feature people ignore until they need them; after that, they find the difference immense. Small on the spec sheet, it still changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. An irritating purchase can be avoided in one of the simplest ways: grasp the difference before you order.
 
The Basic Difference Between Standing and Non-Standing Feet
The basic difference couldn't be simpler. Embedded in the soles of standing feet, metal bolts let the doll stand upright without support. Damage to the feet is the result of attempting to stand a doll with non-standing feet, which don't have these bolts and so only permit sitting or lying down. It all hinges on the bolts, with everything else following from whether they're present or not.
 
A Wider Range of Poses and Settings
Necessary for photography and display: standing feet. A doll that stands unaided can be photographed full-length with no apparent supports, and displayed in a corner, a doorway, or anywhere else she needs to be upright. The principal reason most photographers specify standing feet when ordering is the wide range of poses and settings it opens up that non-standing feet rule out.
 
Stability in a Wet Environment
Shower use is another thing for which standing feet are essential. For showering with your doll, standing ability is a requirement; lying her down in a shower is both impractical and risky. Her stability in a wet environment is down to the standing feet, and the metal bolts keep the feet from absorbing water the way non-standing feet would. It's a real safety consideration since water absorption in non-standing feet can lead to rust and eventual structural failure.
 
The Source of a Lot of Damaged Dolls
Let's expand on shower use, because a lot of damaged dolls start there. With non-standing feet, the foam or filler material inside the ankle soaks up water when it gets wet. Basically unfixable once it starts, the rust the water causes in the metal skeleton inside the leg takes weeks or months to become apparent. Careful or not, a doll with non-standing feet should never be in the shower; the water will find its way in whatever precautions you take.
 
Standing Feet Make Storage Easier
There's also easier storage with standing feet in some setups. A hanging hook or a storage case isn't needed for a doll with standing feet, who can be stored upright in a corner, a wardrobe, or a storage cabinet. Space-efficient, this suits purchasers who don't have room for a hanging setup, and it's good for customers who want to display the doll rather than keep her hidden. Some buyers prefer that the standing feet make it possible to store the doll in a way that's evident and accessible.
 
Metal Bolts Add Weight
The price you pay for standing feet is that they're somewhat more costly and somewhat heavier. Few percent higher is the normal cost versus a doll with non-standing feet, with the metal bolts adding a small amount of weight and the manufacturing process being more involved. The extra cost is typically worth it and the difference is small, but a really tight budget makes it worth knowing about.
 
Distracting in Photos
Another disadvantage is that the bolts can become noticeable if the feet are bare. If the doll wears high-heeled shoes or open-toed footwear, the bolts might be apparent in photos, which some customers find distracting. No reason to steer clear of standing feet entirely, since this slight aesthetic issue can be solved with closed shoes or footwear that conceals the bolts.
 
Non-Standing Feet: Cheaper and Lighter
Non-standing feet are cheaper, lighter, and perfectly fine if the doll will only be used in bed and not displayed standing or taken in the shower. For a doll who'll mainly be on a bed or sofa, perfectly enough non-standing feet free up cash for other upgrades, such as articulated hands or a better wig. An entirely valid choice, this, for customers who know what they want.
 
Comfortable to Touch
Comfort to the touch is another point: non-standing feet are somewhat softer and more flexible, which some purchasers prefer. This is a subtle difference, and it's not typically enough to justify the choice on its own, but it's worth knowing about if you're specifically looking for maximum softness. Rather than feeling as if they have a hard core inside them, the feet on non-standing dolls feel more like the rest of the doll.
 
Remember They're Non-Standing
Attempting to stand the doll regardless, after forgetting what kind of feet they have, is the large risk purchasers run with non-standing feet. The foam inside the ankle can't support the doll's weight. It tears or collapses, and that's genuine damage from a usual error. The result: the feet are permanently damaged, and the doll can no longer stand even if you try to support her. Keep in mind that non-standing feet are non-standing, if that's what you're buying, and don't be tempted to test their limits.
 
Why Retrofitting Doesn't Work Well
And what about retrofitting standing feet to a doll that doesn't have them? The short answer is a no, not easily. Cutting into the feet and installing new hardware is what adding the bolts after that needs, which is pricey and frequently doesn't work as well as the original; the bolts are embedded in the soles during manufacturing. If you might want standing feet later, and you're considering a doll without them, acquiring a doll with standing feet in the first place beats attempting to add them later.
 
Standing Feet Don't Limit What You Can Do
Direct is the sensible advice for customers choosing between standing and non-standing feet. You need standing feet if you plan to photograph the doll, display her standing, or use her in the shower. When you only want to use her in bed or on a sofa, and display doesn't matter to you, non-standing feet are perfectly enough. If you're on the fence, go with standing feet, the safer option, because nothing is ruled out and the small additional cost is worth paying.
 
A Gender Consideration
There's also a gender consideration worth mentioning. Male dolls tend to advantage more than female dolls from standing feet, as they're heavier and more hard to store in any other way. Stored lying down, which puts pressure on the body and needs more space, is how a 45kg male doll that can't stand has to be kept. Standing feet give male dolls the ability to store upright, which is a genuine advantage for purchasers who don't have a lot of room.
 
A Final Note on Appearance
One final note: the aesthetic difference between standing and non-standing feet. The bottom of standing feet is slightly harder because of the bolts, something that can be evident when the doll is barefoot. Less aesthetically pleasing, to some purchasers, is this, especially on dolls with delicate features, as the hard soles look slightly industrial. Non-standing feet are more natural-looking and softer, something some customers prefer. The trade-off only matters if you're photographing the doll barefoot; if barefoot photos are a priority, it's worth factoring into your decision.
 
Non-Standing Feet Are Lower-Maintenance
Another angle worth considering is maintenance. Standing feet need to be checked periodically to make sure the bolts are secure, because a loose bolt can damage the foot or the ankle, and a bolt that falls out entirely can cause the doll to collapse. Use the appropriate tool to tighten any bolts that feel loose when you check them by gently twisting them every few months. Because non-standing feet have no hardware to come loose, they don't have this issue, and they're marginally lower-maintenance in the long run.
 
Carpet Grips Well
How the doll stands on different surfaces is also impacted by the bolts. The doll is steady on carpet, where the bolts grip well. Bolts can slip on hard flooring, particularly a smooth floor, so the doll may need additional support to stay upright. A small mat or a grippy pad under the feet will avoid sliding on a hard surface, so consider one. The doll isn't standing in the first place with non-standing feet, so there's no issue there; with standing feet on a hard floor, it's worth knowing about.
 
Usually Invisible in Shoes
A final consideration is frequently overlooked: how standing feet impact the doll's overall proportions. Bolts mean a small quantity of additional length in the foot, which can somewhat change how the doll looks in barefoot photos. It's worth knowing about if you're planning to photograph the doll barefoot and you care about specific proportions, though this is a subtle effect and usually invisible in shoes. Without the bolts, non-standing feet don't have this effect, and the feet are marginally shorter and more natural-looking.
 
Select Standing Unless You're Certain
Posing, display, storage and shower options that non-standing feet don't offer are opened up by standing feet, and the bottom line is that they're worth the additional cost for most buyers. The only purchasers who should skip them are those who are certain the doll will only be used in bed and won't be displayed or photographed standing. Anyone else should go for standing feet, the better choice and one of the simplest upgrades to justify. More info at this The Definitive Look at Sex Dolls- Start Here (https://avtechforums.com/showthread.php?tid=152813) 48baf8d  alongside all Your Ultimate Look at Sex Dolls Today- The Honest Breakdown (https://gelsenkirchen1904.de/thread-4756.html) and A Straight-Up Rundown of Sex Dolls Today- What Actually Matters (https://www.antiradary-forum.cz/viewtopic.php?p=32180#32180). Also check out  additional reading (https://zivotkostelecnadlabem.cz/viewtopic.php?t=759) which is worth considering with  discover more here (http://1.s.2.free.fr/viewtopic.php?f=18&t=556603) not to mention  visit homepage (https://california.chat/showthread.php?tid=210) together with  look what i found (https://my-mobile.eu/viewtopic.php?t=10398) not to mention  go right here (http://team-uber.com/forum/viewtopic.php?f=3&t=1006) which is worth considering with  view website (https://codeplugs.com/forums/showthread.php?tid=1279) not to mention  this (https://forum.drapinballleague.com/showthread.php?tid=1559) not forgetting sites such as  browse around this site (https://dreamstation.site/showthread.php?tid=5380) alongside all  this link (https://avtechforums.com/showthread.php?tid=148768) and  view publisher site (https://ulundi.online/mybb/showthread.php?tid=206) for more.